JP Turbo B375X for Toyota 8ARFTS IS200T

Product Number:5000050075Toyota 8ARFTS IS200T

SKU: 5000050075 Categories: ,

Additional information


This bolt-on turbo is plug and play on the factory location.  While the max power has increased, it will not compensate for the response and transmission characteristics of the original setting.  The power can be increased to high RPM and the maximum power can reach up to 350HP. 

Application for
Lexus NX 200t 8AR-FTS  2.0L 2015~2021 IS 200t 2014~present GS 200t 2013~2020 RX 200t 2016~present RC 200t 2015~present Toyota Crown 2012~2018 Highlander 2014~2019 Harrier 2013~2020



Dual ceramic ball bearing The low friction allows the bearing to work at much lower required force and gives a boost at earlier RMP.  The ceramic ball is made of  Si3N4 high-precision fine ground ceramic ball. The spherical surface is in a perfect mirror state.  With the match of the high-temperature, wear-resistant, shock-resistant and lightweight retainer cage, our bearings give an earlier boost than other ball bearings !   

This upgraded high-flow turbine wheel comes with Inconel alloy.  It's able to withstand higher temperatures and pressure.  As to the blade design, it offers much higher efficiency in terms of airflow, smoother exhaust and backpressure reduction.  In return, we have much better wheel performance.   

The upgraded aero grade aluminum billet compressor wheel allows higher intake air volume and improves air inlet efficiency.

Direct Bolt-On ; can be installed with the original peripheral parts, easy and convenient to install.   The turbine housing valve parts are made of heat-resistant, corrosion-resistant, high-strength alloy, which withstands long-term high temperature and valve opening-closing impacts.  
Balanced by Schenck balancing machine Precise balancing is one of the essential procedures in JP Turbo production. A good balance is always an important factor in having an outstanding performance and reliability of a turbocharger. A good balance can also improve the noise generated by the high-speed operation. We have very strict operating standards for balance.  First, we perform a low-speed dynamic balancing on a high-precision single-piece balancing machine in order to achieve the best balance of the parts. Secondly, we rigorously assemble the CHRA parts. After the assembly is completed, the high-speed dynamic balance is then performed. Our high-speed dynamic balancing machine can reach a maximum speed of 250,000 RPM.  This balancing standard surpasses the OEM standards.  Each turbo is accompanied by a serial number and the balance test result is kept in our database.  

Stock Turbo VS JP Turbo B375X

The wheel comparison

Necessary ModificationsIn order to maximize the performance of this turbo, we recommend upgrading suitable software as well as a downpipe, exhaust system, intercooler and air intake.